PRUSA 3D Printing Podcast (Prusa3D)

We go over the recap of 2020 article and chat with the awesome maker and designer DSK0001.

The main topics are:
- New contest at PrusaPrinters
- new PrusaSlicer 2.3 features we haven't yet shown
- guest 3DMonkeyNL

We talked about new features that will come to PrusaSlicer in the future, we played with internal development builds and tested the new functions in action. We also discussed the sculpting competition on PrusaPrinters. 

We'll talked about 3D printed turntables with our guests from Frame Theory. And we previewed "Makes" prototype on our PrusaPrinters.org.

We were joined by the creators of the wonderful animated movie "Even Mice Belong in Heaven". So far the movie is enjoying great reviews and we are very proud to play a certain role in its creation. Namely, we are talking about a trio of the Original Prusa i3 MK3 printers used to create some of the puppets.

We talked with Alain, our firmware developer, about how the loadcell sensor on the Nextruder works. Turns out, it's way more involved than simply detecting the reading crossing a threshold! Of course we also talked about other parts of the firmware development and about other news.

We were be joined by the awesome David Hewlett or as you most likely know him - Dr. Rodney McKay from Stargate!

Recording of our extra-long Christmas special live stream! :)

AI is everywhere now, but are there any real practical uses for it in 3D printing? Are we developing any AI assisted tools? How are creators on Printables using AI to create models? We tackled these and many more questions in our latest Prusa Podcast.

The second official Prusa Livestream!
We invited the leader of our firmware team and a community firmware developer and talked about firmware 3.9.0 features. We answered your questions, talk about new Prusaments and updates to PrusaPrinters and more! Tweet a question with a hashtag #PrusaLive and we'll do our best to try and answer it next time!

Printables.com is here and you can bet that's what we talked about! And we were joined by JBV Creative, an artist and engineer creating awesome 3D printable designs.

The main topics are:
- Announcing the topic of the next PrusaPrinters designer competition
- Designer spotlight with Bugman_140
- Q&A
You can ask questions ahead of the time by tweeting them with the hashtag #PrusaLive

We were joined by Nathan, the lead developer of the Nextruder. We talked about the XL and answer your questions about it, we bet you have a lot of them! :) But first, we checked out the latest news from Prusa, such as new firmware releases and upcoming Black Friday deals.

PrusaSlicer 2.6 alpha 1, new white Prusament, MK3 firmware, guest @knafs_co

We were joined by designer Fr3d, a creator mostly known for his fun dioramas. We talked about the latest updates to PrusaPrinters.org and we showcased new Prusament color. Josef couldn't join us this time due to his CEO duties (meeting).

In this episode, we showcased the Community Feed feature on Printables.com, something we're excited to have finally out. We'll were joined by Dreaming Robotics and talked about their 3D printed electric spinning wheels that spin plant and animal fiber into yarn. The first PrusaSlicer 2.5 alpha is out, so we showcased that too. And we can't forget about MRRF recap and the article from our new Sustainability head.

The main topics are:
- Repkord & OPShieldsUp with our guest Pooch
- LA1.5 changes in upcoming fw 3.9.1 and how to calibrate it
- Q&A - a secret little extra!
You can ask questions ahead of the time by tweeting them with the hashtag #PrusaLive

Hey everyone! It's time to look at the Organic supports in PrusaSlicer! We'll also talk with Mike from Diamond Kinetics about advanced analytics of baseball moves, using sensors prototyped on our 3D printers.

We nerded out with Fotis, Wekster and Fixumdude about creating models for 3D printing. Our surprise guest Grant from 3d Musketeers shared his thoughts on the new features in PrusaSlicer 2.6.1. And we chatted about other recent 3DP news.

The recording from the first official Prusa Livestream!  We'll talked about Print on demand on Prusaprinters, the new Prusament PC Blend, the just released firmware 3.9.0 and more! We also answered a lot of questions from the chat. Tune in and have a great time! 

PrusaSlicer 2.4 is out and we talked about the endless list of new features! We were joined by Out Of Marbles, creators of fantastic 3D printable marble machines. And we gave a sneak peek of Prusament Resin! :)

In this episode, we talked about a brand new feature in the MK3S+ firmware called the Thermal protection model. And we were joined by the awesome maker Morley Kert, talking about 3D printing, his mobile repair station and more!

The highlight of this episode is a chat with an awesome YouTuber and maker Alexandre Chappel.

We had the pleassure of having David Hewlett, who you might know as Doctor Rodney McKay from the sci-fi show Stargate Atlantis, in our HQ during the Prague Comic Con weekend. We talked about 3D printing in education and filmmaking, about 3D printing in STEM, which is a topic close to David's heart, and about many other topics us 4 nerds found exciting! :)

Thomas Rahm and Daniel Schubert worked on better support structures for 3D printing. Our implementation of Organic Supports in PrusaSlicer is an evolution of the tree supports by Thomas, which are significantly improved tree supports originally from Cura. We would like to thank the Ultimaker Cura team, Thomas Rahm and Daniel Schubert for the effort they have invested into the problem. Thomas and Daniel accepted our invitation to visit our headquarters, this interview was recorded during their visit.

We talked about the newly released MK4 and answered your questions. (Re-upload, first upload had 10 minute of music at the beginning by accident)

We'll also talk about the recent updates (PrusaPrinters, organization competition, new Prusa stories, MINI firmware 4.3.1).

We announced the winners of the last two contests on PrusaPrinters and talked about the new reward systems. PrusaSlicer 2.4 was just released, so of course, we covered that as well. And Caleb Kraft joined us to talk about the Controller project!

In this episode, we were joined by Adam from the Prusa Polymers team. We talked both about the new PA11 material but also about Prusament in general. We also looked at PrusaSlicer 2.5, which is now released.

The main topics are:

- Winners of the Lights and 3D printing contest

- Prusa print price calculator

- guest Wekster

- Q&A

- announcing winners of the secret competition!

We've been streaming PrusaLive for a year now, time flies! In this special anniversary episode, we reveal a brand new Prusament material! We catch up with guests who appeared on the show in the past - Wekster, 3DMonkeyNL and DSK001! We also announced the PrusaPrinters designer contest winners (Gardening theme) and announced the theme for the next contest. We showcased the new PrusaSlicer feature and we talked about the future of our firmware and.

In Prusa Live #5 we talked about the new features in firmware 4.1.0 for the Original Prusa MINI. We were be joined by a special guest - Lauren. We talked with her about ERRF and Abuzz designs.  And as always, we answered your questions. You can ask them ahead of the time by tweeting it with the hashtag #PrusaLive

In Prusa Live #4 we were joined by a special guest - Luke from OutOfDarts! We talked about 3D printed Nerf blasters and mods, his 3D printing farm made of Original Prusa printers, how he manages it, what materials he uses and how 3D printing enabled him incredibly fast prototyping. 

We also talked about our pick of the week from PrusaPrinters and about the new designer contest.

Our guests were the guys behind mybar.io​ check them out :)

Our guest was a maker and YouTuber Zack Freedman! We talked about the new native PrusaSlicer build for M1 MacBooks, dark mode on Windows and more!

PrusaLive #21 was loaded with content! We'll had multiple guests from our community makerspace "PrusaLab", we'll talked about the lab itself and the projects created in it. We also announced that we're joining the 3MF Consortium. And we also announced the winners of the PrusaPrinters organization design contest!

First time from a new studio!

We chatted about the challenges of 3D printing chocolate with the founder of Cocoa Press, Evan Weinstein! We also talked about the many improvements in the upcoming firmware 3.10 for our 8bit printers (MK3/S/+, MK2.5/S). 

We were joined by Andrew Mountcastle, an Assistant Professor of Biology at Bates College. He uses Original Prusa Printers in his labs with some pretty interesting applications.

We talked with Ben and Garth from the Meshtastic project, we also discussed the new self-extinguishing filament from the Prusament team.

We talked about the just-released Original Prusa SL1S SPEED resin 3D printer. And we were joined by Synthetic Ephemera, a creator of fantastic 3D printed ball-jointed dolls.

We chat with a great designer and our friend Fotis Mint and we show Prusa Academy for the first time :)

We were joined by Paul from PrintShift, who mods Original Prusa MINI with auto-ejecting belts.

We're talking about all the just released things.
We also go over Black Friday deals and answer common questions.

We talk about the smoothable Prusament PVB and chat with the awesome professor Paul Paukstelis and his educational 3D printable models.

3D printed guitars and amps, automatic generation of dowel pins in PrusaSlicer 2.6, new studio and more!

In this stream, we talked about the new Printables Analytics, new resin bundles, current designer contests and realistic Halloween prop-making with VanOaksProps.

We were joined by Jaimie and Jay from Wicked Gamers.

Our guests were Juka and Silvestr from Make3D Company Limited, a very interesting company based in The Gambia. There, they use 3D printing for many use-cases critical for a developing country. Repairing bikes, printing braces for injured limbs or casting molds for emerging businesses. We also talked about the new Enclosure.

It's the last episode of the year and we're bringing in many guests to have some fun! You'll see 3DPrintingNerd , Neil3DPrints, Wekster , Dsk001, Chris and Liz from MakerDeck, and David Hewlett!

We talked with Taylor from Sacr3d Etching about his awesome laser-etched frames and extrusions. We also announced the winners of the Games design competition and gave a sneak peek of the Dubai project.

The main topics were:
- Announcing Upcycling Prusament spools contest winners
- 3D printed Launchsonde with a special guest Braiden, Launchsonde is a rocket, which used to capture atmospheric and hurricane data
- Firmware 4.2.0 for the Original Prusa MINI
- Q&A
You can ask questions ahead of the time by tweeting them with the hashtag #PrusaLive

We were joined by the talented designer 3DPrintBunny and we talked about her modeling techniques.

The main topics are: - new CW1 & MINI firmware - Designer spotlight with Loubie3D - Q&A  You can ask questions ahead of the time by tweeting them with the hashtag #PrusaLiveThe stream will be on for about an hour. See you there!

3D printable binocular telescopes with Analog Sky, new Printables features. Reupload, original upload had 10 minutes of music in the start.

Designer Clockspring 3D joined us to talk about his creations and design process.

The main topics are:
- 3D printed e-bikes with our guest Ladislav Jecminek
- Mini contest winners
- firmware 3.9.1
- Q&A
- announcing winners of the secret competition!

In this episode, we talked with Chris Pirillo and BrittSithlord from Maker Deck. We also talked about the alpha version of MINI/MINI+ firmware that supports wifi connectivity. And we revealed an upcoming new Prusament material.

PrusaPrinters picks of the week:

Mikolas - https://www.prusaprinters.org/prints/49163

Matt - https://www.prusaprinters.org/prints/55535-dodecahedron-snowball-maker

Jo - https://www.prusaprinters.org/prints/5008-voronoi-pokemon-vol-2 0:00

Countdown 10:24

Intro & Picks of the week

16:26 MINI FW 4.3.0

22:07 PrusaPrinters new features

30:42 Polymate3D - chat with Paul

53:18 PrusaLive twitter contest

1:00:56 Q&A